AT2035

Shock mounted and with XLR outputs, the AT2035 is equipped with a switchable 80 Hz high-pass filter to remove unnecessary low-end noise. If you’re wanting to record big voices or big instruments (particularly brass and drums) the 10 dB pad helps prevent the condenser from overloading, meaning the AT2035 handles high sound pressure levels with ease.

With its high-performance specifications, the AT2035 provides an exceptional level of consistency from model to model. The AT2035 also comes equipped with a luxury, leatherette and cushioned protective pouch and a custom shock mount.

AT2035 Build Quality

Constructed with premium materials and unrivalled Japanese engineering and design, the AT2035 features a full-metal, aluminium chassis and steel mesh grille – it is built to last. The included premium, leather effect, padded zip case means you can transport the AT2035 easily, safely and confidently. The seamless simplicity of the AT2035 means all you have to do is hook up to your preamp with an XLR cable (not included) and you’re good to go.

Japanese Engineering

Like all Audio Technica microphones, the AT2035 is designed with the knowledge and expertise that comes with over half a century of Japanese audio engineering and sound design. The AT2035 is beloved by vocalists, bands, recording artists as well as podcasters, voice over professionals and online content makers.

Large diaphragm for smooth, natural sound and low noise
High SPL handling and wide dynamic range provide unmatched versatility
Custom shock mount provides superior isolation
Switchable 80 Hz high-pass filter and 10 dB pad
Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
Includes custom shock mount & protective pouch

Microphones
Element	Fixed-charge back plate, permanently polarized condenser
Polar Pattern	Cardioid
Frequency Response	20 – 20,000 Hz
Low Frequency Roll Off	80 Hz, 12 dB/octave
Open Circuit Sensitivity	-33 dB (22.4 mV) re 1V at 1 Pa
Maximum Input Sound Level	148 dB SPL, 1 kHz at 1% T.H.D.; 158 dB SPL, with 10 dB pad (nominal)
Dynamic Range	136 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio	82 dB, 1 kHz at 1 Pa
Phantom Power Requirements	11-52V DC, 3.8 mA typical
Weight	403g
Dimensions	170.0 mm (6.69″) long, 52.0 mm (2.05″) maximum body diameter
Output Connector	Integral 3-pin XLRM-type
Accessories Included	AT8458 shock mount for 5/8″-27 threaded stands; 5/8″-27 to 3/8″-16 threaded adapter; soft protective pouch

AT2035

AT2035 Build Quality

Japanese Engineering

Related Products

AT2020

AE6100

ATR1200x

ATM75

AT4033a

MB3k