We designed the Airmate-12 to fulfill the requirements for a high grade radio production mixer. This console is the reliable workhorse for the self-op production D.J. that needs an internal two Telephone Hybrid and USB connection to the PC (e.q. for streaming to the web) and the options of a VoIP or Bluetooth channel and an AES output.
A heavy duty 19″ rack mounted RF shielded chassis houses 12 vertical triple input modules giving flexibility rarely found in a mixer of this type
Eight input channels with high quality balanced microphone inputs on XLR and two stereo line level inputs on Cinch (RCA) connectors. Every Mic input has an insert for signal processors.
And… every line level line B input can be converted into a phono (record player) channel by simply fitting an optional stereo R.I.A.A. equalized phono pre-amp.
The Airmate-12 has the usual stereo faders, stereo Aux send and return, monitor master with “follow phones” and a phones output with a split control function.
There is a balance control to continuously adjust the volume between main output and stereo Cue signal.
In addition, there is a special Radio On-air/production section featuring; Selfop switching to automatically cut control room level when the D.J. mic is active; a Clean feed output to also drive
an external Telephone Hybrid for talk shows and interviews, if you need more Hybrid channels than the 2 built in ones; a special announcer output that normally follows main output but can be
switched so that the main output, or any cue signal that is selected, can be heard when in the “follow phones” mode.
A large Talkback switch activates the built-in electret talkback microphone for easy communication with the Clean-feed output, Aux output and/or Announcer output.
INPUTS.
Mic inputs: bal, 2kOhm, XLR. Phantom: 48 volt.
Noise: – 122 dBr (A-weighted).
Sensitivity: – 70dB min, OdB max.
Insert: -10dBv in/out.
Line inputs: unbal., 10kOhm, Cinch.
Gain: range of 40dB.
Phono inputs: unbal. 47kOhm, 5 mV.
2 Track return: – 10 dBV at 10kOhm.
Aux returns: – 10 dBv at 10kOhm stereo
USB.
Fully compliant with USB 2.0 playback and record mode.
HID Functions: Volume/Mute
TELEPHONE HYBRIDS.
RJ-11 connectors for phone line/dialler
Mix Minus rejection @1kHz -60dB.
OUTPUTS.
Left/Right: + 4 dBu bal. XLR.
Monitor/Aux : + 4dBu unbal. on Cinch.
Cleanfeed/Announcer: + 4dBu, Jacks. Tape outp: -10dBv, unbal. Cinch.
Headphone: 16-600 Ohm, Jack.
Announcer: 16-600 Ohm, Jack.
EQUALIZER.
High: + / -12 dB at 12kHz shelving. Mid: + / -12dB at 1 kHz bell curve.
Low: + / -12dB at 60 Hz bell curve.
OPTIONS:
AES/EBU digital stereo output and AES digital 2 track input plus existing
analog outputs on 2 jacks.
RIAA pre-amp on line input B for phono cartridges, 60881597
OVERALL
Frequency response: 10 – 60.000Hz.
Distortion: < 0.009% max at 1 kHz.
Start switch: reed relay.
Ledbars: 21 segment.
Power Consumption: 30VA
START
Stereo jack connector to internal opto coupler 24volt/50mA max.)
The opto coupler switches between tip and ring of the stereo jack
(So tip is shorted to the ring)
MIC ON
Stereo jack connector to internal opto coupler(24volt/50mA max.)
The opto coupler switches between tip and ring of the stereo jack
(So tip is shorted to the ring)
DIMENSIONS
Left-Right rack mountable. (722mm width)
Front-Back: 356mm (8HE).
Height: 105mm.
Space below front panel: 20mm for table top. Weight: 14 kg.
For Drop through mounting (on top) cut a hole of 590 x 335 mm.
For Drop through mounting (milling) cut a hole of 622 x 355.15 mm. with a radius of R=20 and a depth of 2mm
Inquiry Now
Descritption
Explore More
